top of page

CINTAS  MANILLAR

CINTAS  MANILLAR

Preset Co2 Inflator 3-01.png

Preset PSI

Plug in plugger-01.png

Mount end load and
rubber strip

Plug into tire-01.png

Plug to the flat tire
through the puncture hole

Inflating-01.png

 Inflate the tire reach PSI

Excess air-01.png

Inflator will leak the air out when reach the preset psi

Finish-01.png

Close the inflator and leave the end load and strip to fix the hole.

TALLA

2160 mm x 30 mm x 3,0 mm

MATERIAL

Cuero de Poliuterano Adherente

DIMENSIONES DEL PAQUETE

85,04 x 1,18 x 0,12 pulgadas; 4.34 oz

COLORES

NEGRO

CUERO DE POLIUTERANO ULTRA ADHERENTE 

Fabricado con compuesto patentado de cuero PU. Proporciona un rendimiento adherente y antideslizante que mejora la capacidad de dirección y manejo. 

MÁXIMO SOPORTE Y DESEMPEÑO

Proporciona un soporte extraordinario para manos y brazos liberando la presión de los músculos. Ayuda a tener un mejor desempeño sobre la bicicleta. Perfecto para ciclismo de larga distancia. 

ESTRUCTURA MULTICAPA DE 3MM

Estructura multicapa como resultado de una mezcla de materiales patentados para ofrecer un extra de comodidad sin comprometer el control. 

TRANSPIRABLE

Estructura especial de cuero PU con múltiples microporos. Los poros crean una zona de respiración que ayuda a liberar el calor de las palmas de las manos. 

ABSORBE FÁCILMENTE LA HUMEDAD 

Nuestro cuero PU patentado es capaz de absorber la humedad manteniendo la superficie seca. Ayuda a mantener un buen agarre durante el ciclismo. El sudor de las manos no afectará al  manejo de la bicicleta. Puedes andar en bicicleta sin necesidad de usar guantes.

CINTAS  MANILLAR

Categories Air Control System-01.jpg

CINTAS  MANILLAR

NEW

Categories Bike Storage 1-01.jpg

CINTAS  MANILLAR

NEW

Categories Bike Parts 1-01.jpg

CINTAS  MANILLAR

Skwiki cleaner.jpg

CINTAS  MANILLAR

NEW

Tools Photo-01.jpg

CINTAS  MANILLAR

NEW

Bottle Cage-01_edited_edited.jpg

CINTAS  MANILLAR

©2020 por Skwiki

  • Instagram
  • Amazon
bottom of page